KHYAM THE RIDGI-DOME XL Instructions De Montage page 11

7/ Now that your Ridgi-dome is on its 'camels knees' depress
one of the manual joints closest to the hub (FIG 32) allowing
the collar to slide past the tongue (FIG 33).
8/ While supporting the centre hub with one hand lift the joint
which will cause the automatic joint to fold inwards (FIG 34).
Repeat point 7 and 8 for the remaining 3 poles.
9/ The centre hub will now want to fall to the ground, allow
this to do so and gently gather all the poles to an upright
position.
First, gather all four of the upper manual joints together, as
shown in FIG 35 and 36.
Secondly draw the lower manual joint of the poles upwards,
allowing the auto joint to slide inwards and the foot of the
pole to remain on the ground, creating a neat bundle of the
poles.
Fig 32
Fig 33
Fig 34
Fig 35
Fig 36
11