Fig 30 - KHYAM THE RIDGI-DOME XL Instructions De Montage

6/ First remove any pegs you have left in for stability whilst
taking any bedroom, porch or annexe sections down etc. Starting
at any of the four main poles, take hold of the lower manual joint
and apply a small amount of pressure inwards towards the centre
of the tent. This will take the tension off the joint and it should
now be possible to slide the moveable grey collar down
approximately 2 – 3cm (see FIG 28 & 29). The joint will open
and the lower half of the pole should fold in underneath the tent
(see FIG 30). Continue around all four lower manual joints.
FIG 29

FIG 30

FIG 28
Your Ridgi-dome should be sitting on it's knees.
FIG 31
10