CONNECTING THE TRANSMITTER
1.
Connect the Transmitter to the PC / Laptop using the USB cable and the HDMI Input.
2.
Wait for 5 to 10 seconds, the network and video indicators will light up, confirming that
the Basic Function video connection is successful. The information on the screen will show
"Connected to NYRIUS..." and display the video source content from the PC/ Laptop.
The network indicator won't light up unless connection is established with transmitter
USB CABLE
TRANSMITTER
RECEIVER
V ID E O
N E T W O R K
SETUP
Connected to NYRIUS...
IR RECEIVER
REMOTE CONTROL
- 6 -
TELEVISION