Chronometer; Display Backlight - SilverCrest SPMR 8000 A1 Manuel D'utilisation Et Informations Sur Les Services

Chronometer

The SilverCrest SPMR 8000 A1 includes a chronometer function for time measurement. The chronometer
can count to 59'59''99.
The chronometer is not available while channel monitoring is enabled.

Display backlight

The PMR display [1] has a backlight to facilitate operating the device in darkness. The backlight will
switch on automatically when pressing any button except the PTT button [11] and the Call
The On/Off button [10] activates the backlight only when powering the unit on.
The backlight will switch off automatically after six seconds.
 Press and hold the Call
chronometer. The chronometer appears on the display.
 Press the Up  button [9] to start time measurement.
 Press the Up  button [9] to stop time measurement.
 Press the Down  button [6] to reset time measurement.
 Press and hold the Call
button [4] for three seconds to activate the
button [4] for three seconds to exit the chronometer.
SilverCrest SPMR 8000 A1
button [4].
English - 87