Oki C830 Guide De Référence Pratique page 36

Maintenance (cont.)
Cleaning the Tray 1 Feed rollers
1. If a hard disk drive is installed in
the printer, press and hold the
Shutdown/Reset button on the
control panel for 3 seconds and
wait for the display to tell you it
is okay to turn off the printer.
Otherwise go to the next step.
2. Turn the printer off.
3. Remove Tray 1 from the printer.
4. Gaining access through the gap
left by Tray 1, wipe the two
paper feed rollers (1) with a soft
cloth lightly moistened with
water.
5. Replace Tray 1.
6. Turn the printer on.
36 English
•