Kapro Prolaser Vector 873 Manuel D'utilisation page 24

Masquer les pouces Voir aussi pour Prolaser Vector 873:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 54
9) Rotate the laser clockwise so that the forward laser beam
passes through marks d1 on the table, and d2 on the wall D.
10) Mark the center of the side vertical beam at 2 locations.
Point a3 on the table near the point a1, and point a4
on the wall A near the point a2. (see figure 13).
d2 X
11) Measure the distances:
Δ1= from a1 to a3
Δ2= from a2 to a4
12) The difference Δ2 – Δ1 should not be more than 3 mm, otherwise
to send the laser level to a qualified technician for repairs.
24
D
d1
X
Figure # 13
A
a2 X
a1
X X
a3
X a4

Publicité

Table des Matières
loading

Table des Matières