Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
NOTE:
Please check, in particular when travel-
ling abroad, if the local power supply
voltage corresponds to the voltage
indicated on the devices or rather the
power adapters.
NOTE:
Should the baby (transmitter) or
parent unit (receiver) not be functio-
ning properly or should unexpected
malfunctioning occur, we kindly ask
you to :
1.) once again first thoroughly read
the respective section of the instruc-
tion manual.
2.) Afterwards please try to find the
error with the help of the following
malfunction chart.
3.) Should you not be able to solve the
problem, we kindly ask you to contact
your specialist dealer or to call our
hotline at
+49 (0)700 /73 374 624
8.00 am – 4.00 pm MON - FRI.
3004.indb 18
All manuals and user guides at all-guides.com
Technical data:
1. baby unit
Internal Power Supply:
External Power Supply::
Capacity:
Channel Frequency:
Norm :
2. parent unit
Internal Power Supply:
External Power Supply:
Channel Frequency:
Norm :
3. plug
Input Voltage:
Output voltage:
Polarity:
Phone Jack:
Norm :
Problem :
Problem / Situation
Distorted sounds or static or
RECEIVER unable to receive
signal (With LED-display ran-
ge exceedance and acoustic
warning).
3 rechargeable batteries 1.2V AAA / Nickel Metal Hydride
Max. 6V 200mA
Max. 10mW
863.4 MHz ~ 863.8 MHz
EN 301489 - 9, EN 301489 - 1, EN 301357 - 2
3 rechargeable batteries 1.2V AAA / Nickel Metal Hydride
Max. 6V 200mA
863.4 MHz ~ 863.8 MHz
EN 301489 - 9, EN 301489 - 1, EN 301357 - 2
230V ~ 50Hz
max. 6V 200mA
LVD: EN 61558-2-6 , EN 61558-1
EMC: EN55014-1, EN55014-2, EN61000-3-2, EN61000-3-3
possible malfunction source
What can be done?
• SENDER or RECEIVER
• Check if both units
is turned off.
are turned ON.
• Low battery (LED display
• Check if the batteries
is flashing red).
have sufficient capacity and
• The RECEIVER is
if they are inserted properly
beyond the SENDER
(+ / -) or if connectors are
range (with LED-display
dirty/ rusty. If capacity is
range exceedance
insufficient, recharge
and acoustic warning).
batteries with the adapter.
• Wrong Channel
• Position the RECEIVER unit
• Interference from other
closer to the SENDER unit.
household
• Check the channel selec
appliances/ units like
tion according to "Channel
cordless phones, computer,
A &B".
cell phones etc.
• Asses the cause of
• Different coding
interference and reposition
of SENDER and RECEIVER
the units.
• Check the coding of the
units.
page
18
30.04.2008 17:46:25
Publicité
Table des Matières
