Safety Instructions Regarding Installation; Technical Specification - Reer Neo Digital Notice D'utilisation

! Always place the baby unit out of your child´s reach (minimum distance: 1 meter).
! Never place the baby monitor inside the crib, cot or playpen.
! The power lead must be secured out of the reach of children to avoid any risk of
strangulation. Do not use extension cables.
! To ensure optimal transmission, the units must be kept upright at all times and placed in
an elevated position.
! DO NOT place the receiver in the vicinity of radio transceivers or microwaves. Radiant
emissions from these devices can significantly affect radio reception.
! Do not use the units near water or in humid places. Do not submerge the units in water.
Do not rinse the units under running water.
! Do not cover the baby monitor with towels, clothes or blankets.
! Avoid extreme heat and direct sunlight.
• Technology: digital
• Receiver: Power supply with micro USB
power supply or optionally with AAA
NiMH power pack (not included in the
scope of delivery)
• Transmitter: Power supply with micro
USB power supply
• Input: 100–240 V 50 Hz 0.15 A max.
• Output: 5 V / 500 mA max.
• transmitter power: TX 130 mA ,

Safety instructions regarding installation

RX 150 mA
• frequency: 2,4 GHz
• range: 250 m
• cable length: approx. 1.55 m
• working temperature: 10 °C - 40 °C
• storage temperature: 0 °C - 55 °C
• standards: EN 301 489-1 V2.1.1:2017-02,
EN 301 489-17 V3.1.1:2017-02 und EN 300
328 V2.1.1:2016-11

Technical specification

GB
15