Parameter Associated To Programming Led (1) Colour; Default Configuration; How To Reset Default Settings; Advanced Configuration (With Wifi Configuration) - Urmet 1083/48 Mode D'emploi

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 16
5.4. PARAMETER ASSOCIATED TO PROGRAMMING LED (1)
COLOUR
Parameter to be confi gured
door unit type
Parameter 1:
door unit ID
Parameter 2:
Parameter 3: door opener
Parameter 4: call button enabling
Parameter 5:
call button association
(*)
with switchboard call
(*) Function only possible if door unit is confi gured as main unit.

5.5. DEFAULT CONFIGURATION

Parameter
Function
Parameter 1
Door unit type
Parameter 2
Door unit ID
Parameter 3
Door opener
Parameter 4
Call button enabling
Parameter 5
Call button association with switchboard call

6. HOW TO RESET DEFAULT SETTINGS

Press the PROGRAM button (10) briefl y to go to confi guration state. The LEDs (1) will blink during this
step.
Then hold the BUTTON (7) pressed for longer than 10 seconds.
The door unit will generate two 2-second long beeps and all parameters will be reset before exiting
confi guration state.

7. ADVANCED CONFIGURATION (WITH WiFi CONFIGURATION)

Prepare the device as WiFi access point for advanced confi guration of the audio-video door units Ref.
1083/48 and audio door units Red. 1083/38. To start this type of confi guration, follow that shown in the
instruction booklet on the Urmet website, which can be downloaded by framing the QR Code shown below
with the camera of your smartphone or tablet:
Audio-video door unit Ref. 1083/48
http://qrcode.urmet.com/default.aspx?
prodUrmet=142027&lingua=en
DS1083-098A
LED (1)
Main
LED C: Green
Secondary
Address 0
LED C: Red
Address 1
Privacy
LED B: Orange
Free
No button enabled
Only the calling button (7)
LED A: Green
is enabled
Both buttons are enabled LEDs on blinking
Not active
LED A: Red
Arm
Parameter value
Default
Main
Address 0
Privacy
Both buttons enabled
Not active
Audio door unit Ref. 1083/38
http://qrcode.urmet.com/default.aspx?
prodUrmet=142025&lingua=en
LED state (4)
LEDs off
LEDs on steady
LEDs off
LEDs on steady
LEDs off
LEDs on steady
LEDs off
LEDs on steady
LEDs off
LEDs on steady
13

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

1083/38

Table des Matières