Phottix Odin TTL Flash Trigger Manuel D'utilisation page 5

Compatibility with Phottix Strato
Series Flash Triggers
The Phottix Odin TCU o ers compatibility with
Phottix Strato and Phottix Strato II Multi
receivers. The Odin TCU will trigger Strato
receivers but will not transmit TTL or power
control data. Strato series receivers will work as
they previously did: With ashes set in Manual
Mode.
1. The Odin TCU set on Channel 1, 2, 3 or 4 and
in any group will trigger Phottix Strato
receivers set on Channel 1, 2, 3 or 4. Other Odin
TCU functions will not a ect Strato receivers.
2. When the Phottix Odin TCU is set to Group A,
press the Test button, the Strato receivers and
the ashes on receivers will test re.
En
3. The Strato II Multi receivers set to the same
channel and compatible group as the Odin TCU
will be triggered. The Odin TCU will not trigger
Strato II Multi receivers on Group D. Other Odin
TCU functions (TTL, Power control) will not
a ect Strato II Multi receivers.
4. The Odin TCU set to Channel 1, 2, 3 or 4 in
TTL/Mixed mode (Group A, B and C) and in
Ratio mode (Group A and B) can be compatible
with Phottix Strato II Multi receivers on Channel
1, 2, 3 or 4 and Group A, B or C.
5. Press the Test button and ashes on Strato II
Multi Receivers will test re in sequence: Group
A, followed by Group B and C.
6. If a group is disabled on the Odin TCU in
TTL/Mixed mode, it will not trigger ashes on
Strato II Multi receivers.
INSTRUCTION MANUAL
5