Setting Up The Flx 70; Charging The Battery In The Headset - Sennheiser FLX 70 Notice D'emploi

Setting up the FLX 70

Charging the battery in the headset

If you charge the battery for the first time, allow charging for at least
3 hours without interruption. Later, 2½ hours suffice to fully charge the
battery. The headset cannot be used during the charging process.
To charge the battery in the headset:
!
Take off the headset and switch it off (see
page 12).
!
Connect the USB charging cable to the
socket for power supply
!
Connect the USB plug of the USB charging
cable to:
– either the USB socket of the FLX 70
power supply
– or a USB socket of a computer
– or the USB socket of the FLX 70 car charger unit (available as an
accessory)
!
Connect either the power supply or the car charger unit to the
appropriate power outlet.
If the battery was completely drained, the LED
beginning of the charging process. During charging, the LED
lights up red. When charging is complete, the LED
The charging process cannot be started during an ongoing call. A fully
charged battery provides a talk time of up to six hours or a standby
time of up to 240 hours. When the battery is about to run flat:
.
flashes red in the
lights up blue.
11