Using The Headset - Sennheiser HMEC 26-2 Notice D'emploi

Using the headset

Using the headset
The HMEC 26-2 is available in different variants which vary in fea-
tures and functions. It is therefore possible that your headset does
not have all of the functions described in the following chapter.
Switching NoiseGard™ on/off
The NoiseGard™
NoiseGard™ active noise compensation on or off. With NoiseGard™
switched off, the headset can be used as a conventional headset.
Set the NoiseGard™
Position Function
ON NoiseGard™ is switched on.
The LED
status (see page 12) or power supply via the aircraft
DC power supply system.
OFF NoiseGard™ is switched off.
The LED
10 | HMEC 26-2
ON/OFF switch
ON/OFF switch
2
lights up, indicating the battery charge
2
is off.
3
allows you to switch the
3
to the desired position: