Assembly - Haussmann 6139.468 Manuel De L'utilisateur

ASSEMBLY

4. Attach wheel assemblies (J and K) with screw (P) and nut (T) as shown in
figure 1. Wheels should not touch the floor when stand is in the standing
position. There should be a gap of 1/8" - 1/4" between the wheel and the
floor. See Figure 1.
5. Add feet (L) as shown.
ASSEMBLING TRAVERSE ASSEMBLIES TO BASE
Q (4)
S (4)
T (4)
Attach the 2 traverse assemblies (F) to the leg assemblies using 4 hex head
screws (S), 4 washers (Q), and 4 self-locking hex head nuts (T). Make sure
that the handles are pointed toward the front of the table, as shown in
Figure 2.
S
Q
F
T
Fig. 2
25