Haussmann 6139.468 Manuel De L'utilisateur page 24

ASSEMBLY
Tools Required
#3 Phillips Screwdriver
ASSEMBLING BASE
P (10)
Q (12) R (8)
S (2)
T (4)
NOTE: For correct assembly, the rear leg assemblies (D and E) must have
their hinged connecting bars on the outside of the base assembly.
See Figure 1.
1. Attache front cross bar (A) (with logo) to the front legs (C) with four hex
head screws (P), four washers (Q), and four hex nuts (R) on each end.
Start nuts and leave loose. See Figure 1.
2. Attach rear cross bar (B) to the rear leg assemblies (D and E). Use four
hex head screws (P), four washers (Q), and four hex nuts (R) on each
end. Start nuts and leave loose.
3. Attach rear leg assemblies (D and E) to the front legs using 2 hex head
screws (S), 4 washers (Q), and 2 self-locking nuts (T). Note washer (Q)
between hinged connecting bar and front leg. See Figure 1.
C
Q
S
T
Q
R
J
P
P
A
P
P
24
Two adjustable Wrenches
D
B
B
1/8 - 1/4"
L
E
K
P
T
Fig. 1