Cleaning The Filter Unit - Foster KF60 Notice D'utilisation

EN
6.4

Cleaning the filter unit

6.4
• Periodically inspect the filter unit (ref A fig. 6-04) and, if necessary
clean it under running water (at room temperature), using a stiff brush.
To remove the filter, grip the tabs, turn anticlockwise and lift upwards;
• push the centre filter (ref. A fig. 6-05) from the underside to remove it
from the micro-filter;
• separate the two parts which make up the plastic centre filter by press-
ing the body of the filter in the zone shown by the arrows (ref. B fig.
6-05);
• remove the centre filter by lifting it upwards.
• after cleaning, remount the filter unit, joining the two parts comprising
the centre filter by pushing slightly until they click into place; insert the
centre filter into the micro-filter (see fig. 6-05). Reposition the filter unit
(ref. A fig. 6-04) into its seat, turning it clockwise until it locks.
36
38
WARNINGS
USER INSTRUCTIONS USER INSTRUCTION
6-05
6-05
6-04
6-05
Fig. 6-04
Fig. 6-05
EN
6-04
Fig. 6-04
Fig. 6-05
35