2.2.7 Options; Program Delay - Foster KF60 Notice D'utilisation

EN

2.2.7 Options

Function designed for loads with hard to dry item s such as saucepans,
non-stick pans and plastic containers. Increases the hot rinse tempera-
ture and can be used in programmes featuring a final drying phase (see
programmes table).

PROGRAM DELAY

(available for all programs except soak)
The "Program delay" function delays the beginning of the washing pro-
gram up to 24 hours from the moment in which programming takes place.
This makes it possible to use the dishwasher at a certain time of day.
Before programming a delay, open the door of the dishwasher, select the
required washing program (see para 2.2 "Setting the washing program
and switching on and off"). Select the day by pressing the Program delay
button (ref. 11 fig. 2-02); each time you press the button, the display in-
creases the delay before the appliance starts by 1 hour.
SPREAD HALF LOAD
Suitable when there are not many dishes to be washed, it saves energy
and reduces the program duration. Place dishes in both baskets then load
the detergent dispenser than less than the normal amount for a full load.
12
USER INSTRUCTIONS
Multi-function detergent
Ideal for multi-function detergents, this option allows washing to
be optimised, with full benefits from the combined-action tab-
lets. When this option is activated, any salt and rinse aid in the
relative containers will not be used.
If the option is not provided, we recommend the use of con-
ventional products (separate detergent, salt and rinse aid),
because with conventional washing cycles, combined products
might create problems such as a white deposit, poor drying re-
sults and residues left on dishes.
N.B.:
When the salt and rinse aid containers are empty, the relative
lights will remain on even if the "multi-function detergent" op-
tion is selected.
IMPORTANT:
When no longer required, the option must be deactivated by
pressing the relative button (the light goes out).
If the water hardness has been set on a value above H3, and
the option is activated, the relative light flashes, warning of a
setting error. Multi-function products are not suitable for use with
very "hard" water; this does not prevent the use of the option,
but the washing results might not be of the best.