Black & Decker GS2400 Traduction Des Instructions D'origine page 6

ENGLISH
Intended use
Your Black & Decker garden shredder GS2400 has been
designed for shredding most kitchen and garden waste,
including prunings, hedge trimmings, twigs and other organic
garden waste as well as paper and cardboard. The shredded
waste is ideal for composting purposes or to obtain a smaller
volume of waste for easy disposal.
This garden shredder is intended for consumer use only. It is
intended for intermittent use: the recommended material feed
time is 40% of the total run time of the shredder. Selecting and
picking up the material will normally provide a sufficient idle
time.
Safety instructions
Warning! When using mains-powered appliances, basic
u
safety precautions, including the following, should always
be followed to reduce the risk of fire, electric shock,
personal injury and material damage.
Read all of this manual carefully before operating the
u
appliance.
Retain this manual for future reference.
u
Remove the plug from the socket before carrying out any
u
adjustment, servicing or maintenance.
Training
Never allow children or persons who are unfamiliar with
u
this type of appliance to use it, nor anyone who has not
read this user manual.
Remember that the operator is responsible for accidents
u
or hazards occurring to other people or their property.
Preparation
Do not operate this equipment in the vicinity of bystanders.
u
Only operate the appliance in open space (e.g. not close
u
to a wall or other fixed objects) and on a firm, level surface.
Wear safety glasses at all times while operating the
u
appliance.
Hearing protection should be worn whenever the sound
u
level seems uncomfortable.
Do not wear loose clothing or jewellery, as these can be
u
caught in moving parts. Preferably wear rubber gloves and
non-slip footwear when working outdoors. Wear protective
hair covering to keep long hair out of the way.
Do not expose the appliance to rain. Do not use the
u
appliance where there is a risk of causing fire or explosion,
e.g. in the presence of flammable liquids and gases.
Do not operate the appliance on a paved or gravel surface
u
where ejected material could cause injury.
To prevent damage to the cutting gear, remove earth from
u
roots. Do not attempt to shred bones, stone, glass, metal,
plastics or rags.
6
Before use, carefully check the appliance and mains cable
u
for damage. Check for misalignment and seizure of
moving parts, breakage of parts, damage to guards and
switches and any other conditions that may affect its
operation. Ensure that the appliance will operate properly
and perform its intended function. Do not use the
appliance if any part is damaged or defective. Do not use
the appliance if the switch does not turn it on and off.
Have any damaged or defective parts repaired or replaced
u
by an authorised repair agent. Never attempt any repairs
yourself.
If the supply cord is damaged, it must be replaced by the
u
manufacturer or its service agent or a similarly qualified
person in order to avoid a hazard. Replace damaged or
unreadable labels.
Safety of others
This appliance is not intended for use by persons
u
(including children) with reduced physical, sensory or
mental capabilities, or lack of experience and knowledge,
unless they have been given supervision or instruction
concerning use of the appliance by a person responsible
for their safety.
Children should be supervised to ensure that they do not
u
play with the appliance.
Residual risks.
Additional residual risks may arise when using the tool which
may not be included in the enclosed safety warnings. These
risks can arise from misuse, prolonged use etc.
Even with the application of the relevant safety regulations
and the implementation of safety devices, certain residual
risks can not be avoided. These include:
Injuries caused by touching any rotating/moving
u
parts.
Injuries caused when changing any parts, blades or
u
accessories.
Injuries caused by prolonged use of a tool. When
u
using any tool for prolonged periods ensure you take
regular breaks.
Impairment of hearing.
u
Health hazards caused by breathing dust developed
u
when using your tool (example:- working with wood,
especially oak, beech and MDF.)
Guard against electric shock
The appliance must be connected to a socket or extension
u
cable containing an earth connection.
Electric safety can be further improved by using a high-
u
sensitivity (30 mA / 30 mS) residual current device (RCD).
Your appliance is designed for use on AC (mains)
u
electrical supplies only. Do not attempt to use it on any
other supply.