Setting The Instrument Functions (Parameter Level) - JUMO B 70.1050.0 Notice De Mise En Service

4.2 Setting the instrument functions (parameter level)

H
Time-out
If no key is pressed for 60 seconds, the instrument automatically switches back to process value display,
see Overview of operation on the first inside page.
The instrument functions and values are set at the parameter level.
h
Press for 3 seconds and
h
Set code 72 for accessing the parameter level by using the
The longer the key is pressed, the faster the value will change.
h
Acknowledge with
parameter name and value appear alternately, e.g.
h
Set value within the specified value range by using the
h
Acknowledge settings with
h
Set next parameter, see Overview of operation on the first inside page.
H
Switching parameters out of display:
The table below lists all the parameters for each instrument type.
Depending on the type designation on the nameplate, parameters which are not required can be hidden.
will appear alternately.
,
.
and keys.
.
and keys.
8