Operation; Battery Status - GMC-I PRO SyS ACP 3000 Mode D'emploi

______________________________________________________________
Always use appropriate equipment for personal
protection. Do not use the flexible current probe
to measure bare conductors unless wearing
protective clothing suitable for high voltage work.
4.4

OPERATION

To activate unit, move the rotary switch from the "off" position to
the required measuring range.
measured is unknown, first select the highest range and then
reduce accordingly.
4.5

BATTERY STATUS

Battery status is indicated by an orange LED on the front of the
integrator module. This LED will flash one time when the unit is
switched ON. The length of time the LED is lit will increase as
battery life decreases. Continuous lighting of LED indicates low
battery and requires batteries to be replaced.
_______________________________________________________________
9
If the value of current being