General Safety Instructions - Bosch T40424 Instructions D'origine

en-us | 64 | T40424

2 General Safety Instructions

WARNING
Read and follow all safety notes and instructions
Failure to follow the safety instructions could result in
serious personal injuries and severe damage to
materials.
Observe and follow the safety notes below.
The load holding device has been specifically
constructed for its intended use. The safety of the
load holding device can no longer be ensured if it is
misused or modified in ways not expressly approved
by the manufacturer. Serious personal injuries or
severe damage to materials could occur.
Ensure that each person using the load holding
device is familiar with these instructions and can
access them at all times.
Ensure that all users are also familiar with the
instructions of the additional tools and workshop
equipment that are necessary for the work.
Carefully read and adhere to the instructions in the
technical safety information of the Volkswagen
Group brands.
Observe and follow the basic information and safety
notes in the corresponding Volkswagen Group
information materials for use on vehicles with high-
voltage components.
Wear safety shoes with ESD protection.
Wear cloth gloves.
Wear safety glasses.
Position hands and feet so as to avoid potential
crushing hazards.
Use the load holding device only for the work
approved by the Volkswagen Group.
Use the load holding device only with the
accessories approved by the Volkswagen Group.
Do not exceed the maximum load capacity of 25 kg.
Use only the screws included in delivery or the
replacement screws with the same size and quality
grade.
2019-02-28
Tighten the screws with the specified torques (see
the workshop manuals of the Volkswagen Group
brands).
The module detacher may only be used alone or with
a suitable workshop crane, such as VAS 6100, and
the swivel lifting hook VAS 691 013 in accordance
with the workshop manuals of the Volkswagen
Group brands.
Ensure that the workshop crane and the swivel
lifting hook are in good working order before each
use.
When using with a workshop crane, ensure that the
path is clear and easily visible.
Move the load slowly and carefully.
Observe the module detacher and the load during all
movements.
It is prohibited for persons to stand under the load
and in the danger zone while the load is being
moved.
Do not work on suspended loads.
Bosch Automotive Service Solutions GmbH
Am Dörrenhof 1
85131 Pollenfeld-Preith
Germany