Publicité
Les langues disponibles
Les langues disponibles
mode when the switch is on. After 5 seconds, the LED lights will be off
and the camera will start to operate independently and enter the standby
mode. Once an animal enters the detection area and detected by the PIR
sensor, the camera will be activated and detect the motion track. If the
object continues to move to the detection area detected by the main sensor,
the camera will automatically take pictures and video. If the animal
leaves the area detected by the sensor, the camera will turn off and return
to standby mode.
3. Night mode
●At night, the infrared LED light will turn on automatically to provide
necessary lighting. The LED light will illuminate objects with a range
of about 3-20 meters. If the objects are too close to the camera, it may
cause overexposure.
●In the night mode, the shot image can only display black or white. When
recording video for a long time, low voltage may have a great impact on
the stability of the machine, so do not record video at night when the
power is low.
Note: The camera is used at night. When the battery voltage is low, the
current will increase due to the infrared light emitting. Low-voltage
operation may have a great impact on the stability of the machine. The
camera cannot take pictures/videos or capture very dark images.But does
not affect daytime photography or video recording.
Image / data output
1.TV connection
This camera can transmit video to external monitor or TV, please follow
the instructions below:
●Turn on the TV and connect the TV to the camera with AV data cable.
●Turn on the camera and turn the switch to "setup".
●After successful connection, the camera will enter the playback mode,
and the LCD screen will turn black, and the captured picture will be
displayed on the TV screen.
2.Connect to your computer to download photos/videos
●After the camera is connected to the computer and enters the removable
disk mode, a removable disk will be added in the "My Computer" window.
Taken photos or videos will be stored in the "DCIM\100MEDIA" directory
on the removable disk. You can enter this directory to copy files to your
computer hard disk.
Note: Do not disconnect the data cable during file downloading to
avoid data loss, and do not plug or unplug the memory card when
connected.
Technical Parameters
Publicité
