Braun BLACK400 WiFi Solar Mode D'emploi page 24

the phone's Bluetooth settings menu, and then turn on Bluetooth (Note:
Bluetooth is off for this operation).
(4)Open the WIFI
▲Manually turn on WIFI: when SETUP mode is set, press 3S on the video
or photo preview interface to turn on WIFI, and the indicator light will
shine. The "WIFI" interface will be displayed on the screen as shown as
below:
（5）Bluetooth opens WIFI to connect the camera:
In SETUP mode or ON mode, click "Connect camera" at the APP on the phone,
▲
click "Bluetooth opens WIFI at the first step", enter the Bluetooth,
search and find the name Sulong xx:xx:xx:xx:xx:xx (12-digit X is a
randomly generated MAC address) and select the corresponding Bluetooth
name, you can choose "Enable WIFI, modify Bluetooth name, cancel".
（1） Select "Bluetooth to Turn on WIFI", and the phone will automatically
jump to the WIFI connection interface; Search for the WIFI name of the
camera, and enter the original password: 12345678, after successful
connection, you will see the interface on the camera. The APP will work
after click "back".
（2）Select "Modify Bluetooth Name", enter "Modify Device Name", you can
enter up to 10 letters or numbers, Bluetooth name suffix MAC cannot be
modified.
(3) Select "Cancel" will return to the Bluetooth.
Note: after successful connection, the hunting camera will enter the