Télécharger Imprimer la page
GE WB28X10119 Instructions D'installation
GE WB28X10119 Instructions D'installation

GE WB28X10119 Instructions D'installation

Publicité

Les langues disponibles

Les langues disponibles

Liens rapides

Installation
Instructions
WARNING:
be performed by a qualified installer or gas
supplier in accordance with the manufacturer's
instructions and all codes and requirements
of the authority having jurisdiction. Failure
to follow instructions could result in serious injury
or property damage. The qualified agency
performing this work assumes responsibility for
the conversion.
Keep all orifices and parts that are removed for
possible future use.
TOOLS NEEDED FOR CONVERSION
Crescent Wrench
1/2" Wrench
Monogram Grills – Orifice Chart
Main Burner (25K)
ProSear Burner (23K)
Rotiss. Burner (ZGG300/ZGG540) (14K)
Rotiss. Burner (ZGG420/ZGG542) (16K)
Side Burners (15K)
This conversion must
1/2" Deepwell Socket
Wrench
Sea level
0'–2,000'
NG
LP
43
54
44
54
50
57
48
56
185
115
WB28X10119 HIGH ALTITUDE
CONVERSION KIT
Use for high altitude conversions
KIT CONTENTS
This kit is designed to convert all grill models
and cooktop burners to operate at high altitudes.
Select the bag for the altitude and installation
situation, extra parts may be present.
Natural Gas Kits:
Bag with orifices for 2,000 to 5,000 feet altitude
(3) #44, (1) #45, (2) #51, (1) #49, (2) #191 orifices
Bag with orifices for 5,000 to 8,000 feet altitude
(3) #46, (2) #52, (1) #47 (1) #50, (2) #196 orifices
Bag with orifices for 8,000 to 10,000 feet altitude
(3) #47, (1) #48, (2) #54, (1) #51, (2) #199 orifices
LP Gas Kits:
Bag with orifices for 2,000 to 5,000 feet altitude
(4) #55, (1) #57, (2) #59, (2) #119 orifices
Bag with orifices for 5,000 to 8,000 feet altitude
(4) #55, (2) #61, (1) #58, (2) #122 orifices
Bag with orifices for 8,000 to 10,000 feet altitude
(4) #56, (2) #63, (1) #59, (2) #124 orifices
2 Conversion stickers
1/4"and 10 mm
Small Flat-Head Screwdriver
Nutdriver
(2 to 2.4 mm or 3/32" tip size,
Safety Glasses
2,000'–5,000'
NG
LP
44
55
45
55
51
59
49
57
191
119
60 mm long)
5,000'–8,000'
8,000'–10,000'
NG
LP
NG
46
55
47
47
55
48
52
61
54
50
58
51
196
122
199
Small Pliers
#2 Phillips
Screwdriver
LP
56
56
63
59
124
31-10706
11-08 JR

Publicité

loading

Sommaire des Matières pour GE WB28X10119

  • Page 1 Installation WB28X10119 HIGH ALTITUDE CONVERSION KIT Instructions Use for high altitude conversions KIT CONTENTS WARNING: This conversion must This kit is designed to convert all grill models be performed by a qualified installer or gas and cooktop burners to operate at high altitudes.
  • Page 2 Installation Instructions CHANGE ALL STAINLESS STEEL CHANGE THE INFRARED SEAR MAIN GRILL BURNER ORIFICES BURNER ORIFICE (on some models) A. Remove all burner grates A. Remove the anchor Anchor Bolt and diffusers. bolt on the left side of the sear burner. Slide B.
  • Page 3 Installation Instructions CHANGE COOKTOP BURNER ADJUST STAINLESS STEEL MAIN ORIFICES (on some models) GRILL BURNERS and AIR SHUTTERS (if necessary) emove side burner grates and burner caps. A. Remove grates and diffusers. B. Turn on one grill burner. Observe the flame. C.
  • Page 4 Installation Instructions OPERATION CHECKLIST ADJUST STAINLESS STEEL MAIN GRILL BURNERS, SEAR BURNER A. Replace burner grates, knobs and rear access AND COOKTOP BURNER LOW cover. SETTING B. Make sure all controls are left in the OFF position. Normally, burners do not need further C.
  • Page 5 Instructions TROUSSE DE CONVERSION POUR d’installation ALTITUDE ÉLEVÉE WB28X10119 Pour les conversions en haute altitude CONTENU DE LA TROUSSE AVERTISSEMENT : Cette trousse permet de convertir tous les modèles de Cette conversion doit être effectuée par un fournisseur barbecue et les brûleurs des tables de cuisson en vue de gaz ou un installateur qualifié, en conformité...
  • Page 6 Instructions d’installation REMPLACEMENT DE TOUS LES REMPLACEMENT DE L’INJECTEUR INJECTEURS DU BRÛLEUR DU BRÛLEUR INFRAROUGE (sur PRINCIPAL EN ACIER INOXYDABLE certains modèles) Boulon de fixation A. Enlevez toutes les grilles des A. Enlevez le boulon de brûleurs et les diffuseurs. fixation du côté...
  • Page 7 Instructions d’installation REMPLACEMENT DE L’INJECTEUR RÉGLAGE DES BRÛLEURS DES BRÛLEURS DE LA TABLE DE PRINCIPAUX EN ACIER INOXYDABLE CUISSON (sur certains modèles) et des REGISTRES (si nécessaire) Enlevez les grilles et les capuchons de A. Enlevez les grilles et les diffuseurs. brûleur des brûleurs latéraux B.
  • Page 8 E. Surveillez les flammes. Saisissez l’arbre à l’aide d’une CETTE ÉTIQUETTE DE CONVERSION CONCERNE pince et tournez LES MODÈLES MONOGRAM DE GE SUIVANTS : lentement le ZGG300, ZGG420, ZGG540, ZGG542, ZGU122 tournevis dans Conversion au : Conversion à une altitude de :...