Cleaning - brondell H2O+ Cypress H630 Manuel De L'utilisateur

CLEANING

Filter Flushing Before First Use / After Filter Change
1. Flush the filters and system with continuous water flow for at least
10 minutes before first time use or after changing any of the filters.
The initial flushed water contains carbon powder and air from the filter. During flushing of filter,
sound will be heard as carbon powder and air is flushed out. This is not a malfunction, please
use the product as usual after flushing the filter.
Because of air in the water, initial flushed water may look murky.
Tips
Cleaning Water Spout
1. Hold water spout and turn it clockwise to remove.
2. Wash water spout under running water and wipe it with dry cloth to remove moisture.
Reattach by turning counterclockwise.
Clean water spout periodically.
Tips
Cleaning Faucet Diverter
1. Hold faucet diverter and turn it clockwise to remove.
2. Wash faucet diverter under running water and wipe it with dry cloth to remove moisture.
Reattach by turning counterclockwise.
8