Axis M32 Serie Mode D'emploi page 3

AXIS M32 Series Installation Guide
AXIS M32 Series Installation Guide
This installation guide provides instructions for installing the AXIS M32 Series on your network. For
all other aspects of using the product, please see the User's Manual, available on the CD included in
this package, or from www.axis.com/techsup
Installation steps
1. Check the package contents against the list below.
2. Hardware overview. See page 4.
3. Install the hardware. See page 6.
4. Assign an IP address. See page 7.
5. Set the password. See page 10.
6. Adjust the focus. See page 12.
7. Complete the installation. See page 12.
Package contents
Item
Network camera
Mounting kit
CD
Printed Materials
Models/variants/notes
AXIS M3203 - Tamper-resistant Network Camera
AXIS M3203-V - Vandal-resistant Network Camera
AXIS M3204 - Tamper-resistant Network Camera
AXIS M3204-V - Vandal-resistant Network Camera
Screwdriver for tamper-proof screws
2 tamper-proof screws (M4x16 Resitorx)
Drill template
AXIS Network Video Product CD, including product documentation,
installation tools and other software
AXIS M32 Series Installation Guide (this document)
Axis Warranty Document, AVHS Authentication key
Important!
This product must be used in
compliance with local laws and
regulations.
Page 3