Dörr VARIO XL-2000 Notice D'utilisation page 10

05 | OPERATION
05.1 Switching the work light on/off, adjusting the brightness
To switch on the light, press the on/off button (06) once. The LEDs light up with 30% brightness.
For 100% brightness, soon after switching on (within max. 5 seconds) press the on/off button (06) a second time,
and a third time to switch it off.
If the lamp is in a light mode for more than 5 seconds, the lamp can be switched off directly by pressing the on/off button (06) once.
After each use, switch off the lamp by pressing the on/off button (06).
05.2 LED charging and capacity indicator
As soon as you have switched on the work light with the on/off button, the LEDs of the charging and capacity indicator (05) light up,
indicating the remaining battery energy as follows:
1 blue LED 25%
2 blue LEDs 50%
3 blue LEDs 75%
4 blue LEDs 100%
05.3 Rotatable LED cover
The LED tube is fitted with a rotatable LED cover. This cover is divided into 3 areas with different light shapers:
Clear area:
1.
Corrugated area:
2.
3. Milky area:
06 | MOUNTING
The Vario XL-2000 work light can be clamped under the bonnet or under the boot lid, for example. The rubberised clamp brackets
(01) can be rotated 360°. The extension length is 1.20 m to 2.00 m.
10
for full light output
for glare-free light
for soft, diffuse light
doerr-outdoor.de