Ryobi TEK4 Manuel D'utilisation page 7

GB
fr dE ES
ImPorTanT SafETY InSTrUCTIonS
Do not place battery products or their batteries near fire or heat. This will reduce
■
the risk of explosion and possibly injury.
Do not crush, drop or damage battery pack. Do not use a battery pack or charger
■
that has been dropped or received a sharp blow. A damaged battery is subject to
explosion. Properly dispose of a dropped or damaged battery immediately.
Batteries can explode in the presence of a source of ignition, such as a pilot light.
■
To reduce the risk of serious personal injury, never use any cordless product in the
presence of open flame. An exploded battery can propel debris and chemicals. If
exposed, flush with water immediately.
Do not charge battery tool in a damp or wet location. Following this rule will reduce
■
the risk of electric shock.
For best results, your battery tool should be charged in a location where the
■
temperature is more than 10°C but less than 34.44°C. To reduce the risk of serious
personal injury, do not store outside or in vehicles.
Under extreme usage or temperature conditions, battery leakage may occur.
■
If liquid comes in contact with your skin, wash immediately with soap and water.
If liquid gets into your eyes, flush them with clean water for at least 10 minutes,
then seek immediate medical attention. Following this rule will reduce the risk of
serious personal injury.
Save these instructions. Refer to them frequently and use them to instruct others
■
who may use this product. If you loan someone this instrument, loan them these
instructions also.
IT nl PT dK SE fI no rU Pl CZ
English
dESCrIPTIon
1. Trigger
2. Target measuring beam
3. Laser aperture
4. Battery compartment
5. Battery pack
6. Battery cap
7. Laser beam
8. Target area
9. LCD Display
10. RECORD button
11. PLAY button
12. Min/max button
13. ºC/ºF button
14. HOLD indicator
15. LASER indicator
16. LOG indicator
2
hU ro lV lT EE hr SI SK Gr Tr