Ryobi TEK4 Manuel D'utilisation page 6

GB
fr dE ES
ImPorTanT SafETY InSTrUCTIonS
CaUTIon
Use of procedures other than those specified herein may result in hazardous
radiation exposure.
The laser guide radiation used in the thermometer is Class II with < 1mW and 630-
■
670nm wavelengths.
Avoid direct eye exposure when using the laser and do not project the laser beam
■
directly into the eyes of others. Serious eye injury could result.
Do not remove or deface any product labels. Removing product labels increases
■
the risk of exposure to laser radiation.
Do not place the instrument in a position that may cause anyone to stare into the
■
laser beam intentionally or unintentionally. Serious eye injury could result.
Do not operate the thermometer around children or allow children to operate the
■
tool. Serious eye injury could result.
Do not use for medical evaluations or to measure body temperature. This product
■
is meant for household use only.
Do not use this product as a precision thermometer.
■
Do not operate the instrument in combustible areas such as in the presence of
■
flammable liquids, gasses, or dust.
Always ensure the laser beam is aimed at a surface without reflective properties.
■
Shiny reflective materials are not suitable for laser use.
The laser shall be used and maintained in accordance with the manufacturer's
■
instructions.
Never aim the beam at a person or object other than the target surface.
■
IT nl PT dK SE fI no rU Pl CZ
English
This product should not be used without the battery cap installed.
■
Handle the instrument with care. Treat it as you would any other optical device
■
such as a camera or binoculars.
Avoid exposing the instrument to shock, continuous vibration, or extreme hot or
■
cold temperatures. Damage to the product and/or serious injury to the user could
result.
Do not use on a ladder or unstable support. Stable footing on a solid surface
■
enables better control of the product in unexpected situations.
Do not use the product if the trigger does not turn it on and off.
■
Use the product in accordance with these instructions and in the manner intended
■
for the product, taking into account the working conditions and the work to be
performed. Use of the product for operations different from those intended could
result in a hazardous situation.
Recharge battery only with the charger specified by the manufacturer. A charger
■
that is suitable for one type of battery pack may create a risk of fire when used with
another battery pack.
Use battery products only with specifically designated battery packs. Use of any
■
other battery packs may create a risk of injury and fire.
When servicing a battery product, use only identical replacement parts. Follow
■
instructions in the Maintenance section of this manual. Use of unauthorized parts
or failure to follow Maintenance instructions may create a risk of shock or injury.
Know your battery product. Read operator's manual carefully. Learn its applications
■
and limitations, as well as the specific potential hazards related to this power tool.
Following this rule will reduce the risk of electric shock, fire, or serious injury.
1
hU ro lV lT EE hr SI SK Gr Tr