Controls And Settings; Direct Controls - Urmet 3000/343 Manuel De L'utilisateur

2

CONTROLS AND SETTINGS

2.1

DIRECT CONTROLS

POWER CONNECTOR
Connect the supplied power cable to the mains connector.
A. "Source" button
Press the button to display all the signal channel menus.
Press the button to Exit the OSD menu.
B. "Upward" button
Press the button to move the cursor to the needed function.
Press the button to change the selected function in OSD menu item.
C. "Downward" button
Press the button to move the cursor to the needed function.
Press the button to change the selected function in OSD menu item.
D. "Rightward" button
Press the button to move the cursor to the needed function.
Press the button to change the selected function in OSD menu item.
E. "Leftward" button
Press the button to move the cursor to the needed function.
Press the button to change the selected function in OSD menu item.
F. "Menu" button
Press the button to display the OSD main menu.
Press the button to Confirm entry menu item.
G. "Power" button
Press the button to turn on or turn off the display.
HDMI1/HDMI2 INPUTS
They allow the connection of an HDMI signal and an audio signal, coming from an external source provided with an
HDMI output
DS3000-058 13