Riester metpak Mode D'emploi page 10

English
Table of Contents
1. Introduction
1.1 Important information prior to use
1.2 Safety symbols
1.3 Packaging symbols
1.4 Purpose
1.4.1 Indications
1.4.2 Contraindications
1.4.3 Intended patient population
1.4.4 Intended operators/users
1.4.5 Required skills/operator training
1.4.6 Environmental conditions
1.5 Warnings/caution
2. First use
2.1 Scope of delivery
2.2 Device function
3. Operation and function
3.1 Symbol identification
3.2 Startup
3.3 Replacing the pad
4. Care instructions
4.1 General information
4.2 Cleaning and disinfection
5. Technical specifications
6. Spare parts and accessories
7. Maintenance / accuracy check / calibration
8. Disposal
9. Warranty
1. Introduction
1.1 Important Information Prior to Use
You have purchased a high-quality Riester product, which has been manufac-
tured in compliance with Directive (EU) 2017/75 and is always subject to the
strictest quality controls. Read these instructions for use (IFU) carefully before
using the device and keep them in a safe place. If you have any questions, we
are available at any time, and our contact information is provided at the end of
this IFU. The address of our sales and distribution partners can be obtained
upon request. Please note all instruments described in these instructions for
use should only be used by clinically trained personnel. The safe functioning
of this device is only guaranteed when Riester original parts and accessories
are used.
10