G Setup Operation For Dual Lane - Panasonic WX-C3010 Mode D'emploi

G Setup operation for Dual Lane

In the case of Dual Lane, two menu boards (Lane A and Lane B) are used.
Only for the Center Module of Lane B, the Dual Lane is set at ON.
ON: DUAL LANE ON (Green)
When there is car in only Lane B, the greeter memory 1
output to the speaker of Lane B.
WINDOW
#1
WINDOW
#2
OFF: DUAL LANE OFF
When there is car in only Lane B, the greeter message
of the memory (1 or 2) is output to the speaker of
Lane B.
WINDOW
#1
WINDOW
#2
Note: When only one center module is set in the system, DUAL LANE to OFF. If DUAL LANE is set to ON, only Message 1 is out-
put to the menu board speaker.
28
Pull forward
(Memory 1)
LANE A LANE B
Hello
(Memory 1 or 2)
LANE A LANE B
When there are cars in Lane A and B, the greeter memo-
ry 2 is output to the speaker of Lane B.
Hello
(Memory 1 or 2)
LANE A
WINDOW
#1
WINDOW
#2
When there are cars in Lane A and B, the greeter mes-
sage of the memory (1 or 2) is output to the speaker of
Lane B.
Hello
(Memory 1 or 2)
(Memory 1 or 2)
LANE A
WINDOW
#1
WINDOW
#2
Hello
(Memory 2)
LANE B
Hello
LANE B