Settings And Counters; Full Glass" Dispensing Quantity - winefit CUBO Mode D'emploi

SETTINGS AND COUNTERS

ATTENTION: To enter the menu SETTINGS and COUNTERS you must remove the bottle
(the green LED
If the bottle was still inserted, the display will read:
Setup
Remove bottle

"FULL GLASS" DISPENSING QUANTITY

The quantity of wine dispensed during a "full glass" dispensing operation may be regulated.
Proceed as described below.
From the main screen:
WINEFIT CUBO
Insert bottle.
press the STOP button
Full glass
Taste
Press the "manual dispensing" button
display will read:
WINE VOLUME
100 ml
If the dose had already been set previously, the display will show the last quantity set.
Pressing , the volume delivered in a glass of wine will decrease by 5 ml at a time;
Pressing , the volume delivered in a glass of wine will increase by 5 ml at a time. The
maximum volume available for the full glass dispensing quantity, is 200 ml.
The error setting is 10%.
Once the desired dispensing volume has been selected, press the "manual dispensing" button
again to confirm.
ENGLISH
will turn off automatically).
. The display will read:
with the FULL GLASS message flashing. The
49