Publicité
15
Système multitrain
The model is equipped with a factory-installed MTS decoder for the LGB Multi-Train System.
It can be used without modifications on analog or digital layouts. For operation with the Multi-
Train System, the model is programmed to loco address 03. For information on programming
the loco address, see the instructions for various MTS components. When operating with the
Multi-Train System, you can remotely control the loco's functions. Press the lighting button
("9" with remotes) to turn the loco lights on or off.
When operating with the Multi-Train System, the loco features a "Back-EMF" function.
This keeps the motor speed constant (and under normal conditions the loco speed),
even when the load of the loco changes, for example, in curves or on grades. This
feature does not work at top speed, because additional voltage must be available to
overcome any added load.
If desired, numerous functions of the 55022 decoder, such as acceleration, braking,
direction of travel and many others, can be programmed using a PC and the 55045
MTS PC Decoder Programming Module (see Instructions for advanced users).
These functions also can be programmed from the 55015 Universal Remote.
Publicité
