marklin 218 Serie Mode D'emploi page 5

Function
This locomotive has a universal electronic
circuit and offers the following features :
G Can be operated with conventional AC power
(32 VA transformer, item nos. 6646 and 6647),
Märklin Delta or Märklin Digital. This locomotive
is not designed for operation with locomotive
controllers of other systems (DC power, pulse
width control, multi-train controls of other makes).
G The mode of operation is set manually with the
coding switches. This locomotive comes from the
factory set for the "AC power" mode of operation.
An address must be set manually with the coding
switches for operation with Delta or Digital.
G Headlights change over with the direction of travel.
The brightness of these headlights depends on
the voltage present in the track.
The maintenance work required with normal
operation is described below. Please see your
authorized Märklin dealer for repairs or spare parts.
No warranty or damage claims shall be accepted in
those cases where parts neither manufactured nor
approved by Märklin have been installed in Märklin
products or where Märklin products have been
converted in such a way that the non-Märklin parts
or the conversion were causal to the defects and / or
damage arising. The burden of presenting evidence
and the burden of proof thereof, that the installation
of non-Märklin parts or the conversion in or of Märklin
products was not causal to the defects and / or
damage arising, is borne by the person and / or
company responsible for the installation and / or
conversion, or by the customer.
Safety Warnings
G This locomotive is to be used only with an operating
system designed for it (Märklin 6646/6647
AC transformer, Märklin Delta or Märklin Digital).
G This locomotive must never be supplied with
power from more than one transformer.
G Pay close attention to the safety warnings in the
instructions for your operating system.
5