Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
troubleshooting
If one or more functions on the bed base have stopped operating:
•
Check under the bed base to verify that the wired connections are secure and that there are
no cords or bedding obstructing the movement of the base .
•
Check to ensure the green LED light is illuminated on the control box . If there is no light, verify
that the input and power cords are properly connected .
•
Unplug the base for 1 hour to reset the electronic components .
•
Plug bed base into a different electrical outlet, or test current outlet with another working
appliance (a grounded, electrical surge protector is recommended) .
If issue is not resolved by following the instructions above,
locate serial number on warranty card or back of remote and call
Ergomotion Customer Service: US 1-888-550-3746
26
Publicité
Table des Matières
Dépannage
