Setting Remote Custom Presets - Ergomotion e Serie Manuel Du Propriétaire

setting remote custom presets

Each remote has a programmable feature that allows you to save two custom positions.
Please read all the instructions below before setting your custom presets on the remote.
STEP 1
Articulate the head and foot to your desired position .
STEP 2
Press and hold one of the picture pre-set buttons
[ ] for at least 5 seconds . The LED lights on the
remote will flash in succession 3 times . Position is now
saved .
NOTE: To restore the preset buttons back to their original factory settings, hold FLAT and ZERO-G® simultaneously
for at least 5 seconds . The original presets will be restored .
To adjust the saved position, repeat steps 1 and 2 and the new position will be stored.
18