D - Configuration; Configuring The Camera And Adding It To The App - Avidsen 123985 Mode D'emploi

BATTERY-POWERED 720P IP WIFI CAMERA
1 - CONFIGURING THE CAMERA AND
ADDING IT TO THE APP
Note: the screenshots displayed have been taken
from the Android version of the IP Link app. The
iPhone version works in exactly the same way.
Download the IP Link app
or Google Play and then launch the app. Accept
the authorisation requests sent by the app where
required (access to the camera for scanning the QR
Code, etc.).
Next, click on the icon.
The camera must be switched on and started up:
from the App Store

D - CONFIGURATION

• If the camera does not fl ash red as requested,
check the power supply and if necessary, restart
the camera using the tool supplied: press the
"reset" button next to the micro USB socket for
at least 5 seconds and then wait.
• If you are sure that your camera is already
connected to internet (for example: set-up already
done on another smartphone), click on "Ajouter
un appareil manuellement" (add a device
manually) to jump to the WiFi confi guration step.
Click on "Le voyant rouge clignote" (the red
indicator is fl ashing) when the camera is ready for
the next steps:
The app asks whether the device is being powered
with rechargeable batteries or not, to ensure the
remaining battery life is handled properly. Select the
desired power option and then click on OK.
EN
9