jbc AD 4300 Mode D'emploi page 8

HOT TWEEZERS
AD 4300 station allows to connect two different
models of tweezers, each one with its respective
range of cartridges and stand:
- PA 1200 micro hot tweezers ref. 1200000.
- PA 4200 hot tweezers ref. 4200000.
For tweezers to work properly, the following
components are required: control unit, hot tweezers,
a stand and a set of cartridges corresponding to
the chosen tweezer.
PA 4200
hot tweezers
Ref. 4200000
Cartridges for the PA 4200
hot tweezers
PA 8120 stand
Ref. 0748120
The tweezers are connected to the station in the
following way:
The cable connector of the tweezers is plugged
into the connector of the stand. The cable connector
of the stand is connected to the terminal of the
station. Please find the connection plan on figure.
PA 1200
micro hot tweezers
Ref. 1200000
7
ENGLISH
PA 8110 stand
Ref. 0748110
1200 cartridges