jbc AD 4300 Mode D'emploi page 5

ENGLISH
ADVANCED HANDPIECES RANGE
All the Advanced soldering handpieces range
can be connected to the AD 4300 station:
- 2210/2225 handpiece ref. 2210000. Power:
20W. For high precision work, SMD etc. This
handpiece can be used with the 2210 and
2225 cartridges. The 2225 cartridges are
smaller than the 2245 cartridges and much
more powerful than the 2210 cartridges.
Available 2210 and 2225 cartridges: see page
56.
- 2245 handpiece ref. 2245000. Power: 50W.
For general soldering work. Available 2245
cartridges: see page 54.
One version of 2245 handpiece covered with
heat isolater is available:
- 2245 Confort handpiece ref. 2245110.
The 2210, 2225 and 2245 handpieces and
cartridges comply with the MIL-SPEC-2000
referring to the potential difference between the
soldering tip and ground connection, must be
less than 2 mV.
soldering iron stand
2210/2225 handpiece Ref. 2210000
AD 8210
Ref.0788210
2210 cartridges
2225 cartridges
Stands
- AD 8210
stand for the 2210/2225 handpiece.
- AD 8245
stand for the 2245 handpiece.
These articles are not delivered with the station.
For a soldering handpiece to work properly, the
following components are required: the control
unit, one handpiece and the corresponding and
cartridge.
The soldering iron is connected to the station in the
following way:
The cable connection of the soldering iron is
connected to the plug in the soldering iron stand
and the cable connection of the soldering iron
stand is plugged into the terminal of the station.
Please find the connection plan on figure.
2245 handpiece Ref. 2245000
4
Ref. 0788210
Ref. 0788245
AD 8245
soldering iron stand
Ref.0788245
2245 cartridges