Instructions For Use - Philips Intellivue Mx40 Manuel D'utilisation

Patient Application
Visually inspect the ECG leadset (and SpO
before applying the patient cable to a patient.
• If any signs of damage or deterioration are seen, immediately discard the
patient cable following approved medical waste disposal methods
specified by local regulations or your patient care facility.
• If no visual damage is seen, apply the ECG leads to the patient following
standard AAMI or IEC practices (refer to the IntelliVue MX40

Instructions for Use).

• If the patient cable includes a SpO
instructions supplied in the IntelliVue MX40 Instructions for Use. If the
SpO sensor is not being used, be sure to securely store the sensor inside
2
the telemetry pouch.
• Recommended SpO
thumb.
Additional Information
For more detailed information describing patient cable use with the
MX40, including warnings, patient safety, and ECG/SpO
application instructions, refer to the IntelliVue MX40 Instructions for Use.
Stryker Internal Control No.: EL10051 Rev B
2
sensor application site is any finger except the
2
2
sensor/cable when present)
2
sensor, follow the sensor application
patient
2