Setup Of Th Charger - Victron energy Impulse S12 Manuel

The charger has been adjusted for only one battery type and capacity.
If another battery is connected to the charger, this battery can be damaged and/or
dangerous situations may occur. Therefore if batteries are changed, you must
contact your supplier/dealer, to adjust the charger to the correct battery type and
capacity.
In case of any questions, you can contact your supplier/dealer
5. SETUP OF THE CHARGER.
When placing the charger it should be observed that it has sufficient ventilation all
around. A space of at least 10 cm should be allowed. W hen used under normal
circumstances the built-in ventilator will be activated during charge. If there is not
sufficient ventilation or the temperature is high, the charger will lower the output current
(resulting in longer charge time) or if the temperature rises over a maximum value, the
charger will stop charging.
The cabinet is made of plastic and suitable as a table model.
6