Av1/Av2 - Panasonic CQ-VD6503U Manuel D'instructions

AV1/AV2

Please refer to the separate "System Upgrade Guidebook" for how to operate this unit when optional devices are
connected.
Preparation:
27
¡Connect an optional external device to the AV1/AV2.
AV Mode Selection
You can view the images and listen to the sounds from
the connected external devices in the AV1/AV2 mode
respectively.
q Touch "Source Button".
d
Press [SRC] to change to the desired
mode.
Note:
¡You can set up the system so that the AV mode is not
selected (source skip).
INPUT is not skipped even if
.)
ON
¡If no operation is performed for 10 seconds or
touched, the operation buttons disappear.
¡AV terminal is not used for the Panasonic car
navigation system (available in future). Refer to
for setting.
NAVI SETUP
Guidebook)
28
CQ-VD6503U
w Touch
(AV1/AV2) on the
Source Selection
Screen.
(a page 39) (AV set to NAVI
is set to
SOURCE SKIP
(a System Upgrade
Source Button
[SRC]
PWR
SRC SRC
MENU
/
VOL
MUTE
P-MODE
ASPECT
ASP
TILT
To switch Operation Screen ON, touch the center of
touch panel.
is
ALBUM
FOLDER
TUNE
TRACK
NAVI
CQ-VD6503U