Troubleshooting - Kenwood KDC-BT665U Mode D'emploi

References
Source name Display information: Main display
STANDBY Source name Date
RADIO Frequency Date
For FM Radio Data System stations only:
Station name/Program type
song title/Radio text+ artist
beginning
CD or USB For CD-DA:
Disc title/Artist
beginning
For MP3/WMA/AAC/WAV/FLAC files:
Song title/Artist
Playing time Date
iPod USB/iPod BT Song title/Artist
the beginning
BT AUDIO/ALEXA Song title/Artist
the beginning
AUX Source name Date
32
ENGLISH
back to the beginning
back to the beginning
Radio text Radio text+
Frequency Date back to the
Track title/Artist Playing time Date
Album title/Artist Folder name File name
back to the beginning
Album title/Artist Playing time Date
Album title/Artist Playing time Date
back to the beginning

Troubleshooting

Symptom
Sound cannot be heard.
"MISWIRING CHECK WIRING
THEN PWR ON" appears.
Radio text+
"PROTECTING SEND SERVICE"
appears.
back to the Source cannot be selected.
• Sound cannot be heard.
• The unit does not turn on.
• Information shown on the
display is incorrect.
back to
The unit does not work at all.
Correct characters are not
back to
displayed.
• Radio reception is poor.
• Static noise while listening
to the radio.
Disc cannot be ejected.
Noise is generated.
"PLEASE EJECT" appears.
Remedy
• Adjust the volume to the optimum level.
• Check the cords and connections.
Turn the power off, then check to be sure the terminals of
the speaker wires are insulated properly. Turn the power
on again.
Send the unit to the nearest service center.
Check the [SOURCE SELECT] setting. (Page 5)
Clean the connectors. (Page 30)
Reset the unit. (Page 3)
• This unit can only display uppercase letters, numbers,
and a limited number of symbols.
• Depending on the display language you have selected
(page 6), some characters may not be displayed
correctly.
Connect the antenna firmly.
Press and hold to forcibly eject the disc. Be careful not
to drop the disc when it is ejected. If this does not solve
the problem, reset the unit (page 3).
Skip to another track or change the disc.
Reset the unit (page 3). If this does not solve the
problem, consult your nearest service center.