Audio Settings - Kenwood KDC-BT665U Mode D'emploi

AMAZON ALEXA
Start listening
While in Alexa idle state...
1
Speak the word "Alexa" to the connected microphone (Page 13) to
activate Alexa.
(or)
Press on the unit to speak with Alexa.
The display shows: "LISTENING...".
2 Communicate with Alexa via the connected microphone.
3 During music playback in ALEXA source, you can perform the
following operations:
To
Play back/pause
Reverse skip/Forward skip
During music playback, press or speak "Alexa" to pause the music and
activate Alexa. You can now start to communicate with Alexa.
On the faceplate
Press 6 IW.
Press S / T.

Audio Settings

1
Press the volume knob to enter [FUNCTION].
2
Turn the volume knob to select an item (see the following table), then
press the knob.
3 Repeat step 2 until the desired item is selected or activated.
4 Press and hold to exit.
To return to the previous setting item, press
[AUDIO CONTROL]
[SUB-W LEVEL] [LEVEL –50] to [LEVEL +10] ([LEVEL 0]): Adjusts the subwoofer output
level.
[EASY EQ] Adjusts your own sound settings.
• The settings are stored to [USER] in [PRESET EQ].
• The settings made may affect the current settings of [MANUAL EQ].
[SW]: [LEVEL –50] to [LEVEL +10]
[BASS]: [LEVEL –9] to [LEVEL +9]
[MID]: [LEVEL –9] to [LEVEL +9]
[TRE]: [LEVEL –9] to [LEVEL +9]
.
Default: [XX]
(Default: [LEVEL 0]
[LEVEL 0]
[LEVEL 0]
[LEVEL 0])
21
ENGLISH