Kenwood Remote Application - Kenwood KDC-BT665U Mode D'emploi

KENWOOD Remote Application

You can control the KENWOOD car receiver from iPhone/iPod touch (via
Bluetooth or via USB input terminal) or Android device (via Bluetooth) using
KENWOOD Remote application.
• For more information, visit <https://www.kenwood.com/cs/ce/>.
Preparation:
Install the latest version of KENWOOD Remote application on your device
before connecting.
Start using KENWOOD Remote application
1 Start up the KENWOOD Remote application on your device.
2
Connect your device.
• For Android device:
Pair the Android device with this unit via Bluetooth. (Page 13)
• For iPhone/iPod touch:
Connect iPhone/iPod touch to the USB input terminal. (Page 8)
(or)
Pair the iPhone/iPod touch with this unit via Bluetooth. (Page 13)
(Make sure the USB input terminal is not connected to any device.)
3 Select the device to use from the [FUNCTION] menu.
See the following "Settings to use KENWOOD Remote application".
By default, [ANDROID] is selected. To use iPhone/iPod touch, select [YES] for
[IOS].
Settings to use KENWOOD Remote application
1
Press the volume knob to enter [FUNCTION].
2
Turn the volume knob to select an item (see the following table), then
press the knob.
3
Repeat step 2 until the desired item is selected/activated.
4 Press and hold to exit.
To return to the previous setting item, press
12
ENGLISH
[REMOTE APP]
[SELECT]
[ANDROID LIST]
[STATUS]
.
Selects the device ([IOS] or [ANDROID]) to use the application.
[IOS] [YES]: Selects iPhone/iPod touch to use the application via Bluetooth or
connected via USB input terminal. ; [NO]: Cancels.
If [IOS] is selected, select iPod BT source (or iPod USB source if your
iPhone/iPod touch is connected via USB input terminal) to activate the
application.
• See "Set the playable source for iPod/iPhone" on page 9 for further
information.
• The connectivity of the application will be interrupted or disconnected
if:
– You change from iPod BT source to any playback source connected
via the USB input terminal.
– You change from iPod USB source to iPod BT source.
[ANDROID] [YES]: Selects Android device to use the application via Bluetooth. ;
[NO]: Cancels.
Selects the Android device to use from the list.
• Displayed only when [ANDROID] of [SELECT] is set to [YES].
Shows the status of the selected device.
[IOS CONNECTED]: You are able to use the application using the iPhone/
iPod touch connected via Bluetooth or USB input terminal.
[IOS NOT CONNECTED]: No iOS device is connected to use the
application.
[ANDROID CONNECTED]: You are able to use the application using the
Android device connected via Bluetooth.
[ANDROID NOT CONNECTED]: No Android device is connected to use
the application.
Default: [XX]