GoPro Hero 4 Silver Mode D'emploi page 26

/ Video Mode
CAPTURING VIDEO
1. Swipe left to display the camera modes, and then tap the upper left
icon (Video mode).
2. If necessary, select a different video capture mode (Video, Time
Lapse Video, Video + Photo, or Video Looping):
a. Swipe up to open the settings menu.
b. Tap Mode, and then tap the desired capture mode.
c. Swipe down to close the settings menu. The icon for the
3. Press the Shutter/Select button [
and the camera status lights flash while the camera is recording.
4. To stop capturing, press the Shutter/Select button [
camera status lights flash three times and the camera beeps
three times.
If the memory card is full or the battery is out of power, your camera
automatically stops recording. Your video is saved before the camera
powers off.
PRO TIP: When the camera is off and QuikCapture is enabled, you
can turn the camera on and immediately begin capturing video just
by pressing the Shutter/Select button [
recording and power off the camera. For details, see Setup Mode.
26
M_H4Silver_ENG-FR_REVE.indb 26
selected capture mode appears in the upper left on your
camera displays.
]. The camera beeps once
]. The
]. Press again to stop
2/5/15 3:15 PM