Alber PS4820 Mode D'emploi page 4

FIRST USE
1. Plug the mains plug into the mains outlet. Both status indicators on the charger illuminate
orange.
2. Connect the charger with the two drive wheels. The magnetic contact of the two charge plugs
ensures an 'automatic' connection with the charge sockets of the e-motion drive wheels. Both
EN
status indicators on the charger flash green.
3. Observe the charge status indication on the charger and on the e-motion drive wheel.
The drive wheel shall not be moved during the charge process.
4. Unplug the mains plug from the mains outlet once both charge status indicators on the charger
indicate "full" with a constant green illumination. In urgent cases the charge process can be
interrupted at any time.
5. Disconnect the charge cable from the rechargeable battery pack.
MAINTENANCE AND CARE
The charger is maintenance-free. If necessary, clean the device only with a damp cloth. Do not use ag-
gressive cleaning agents. It is not permitted for any liquid to enter the interior of the charger. Protect the
mains plug and charge connectors from contamination.
GUARANTEE
We provide a two-year warranty for the product from the date of purchase.
TECHNICAL DATA
Model: PS4820
Rated Input Voltage: 100 - 240VAC, 50Hz - 60Hz
Input Current: Max. 2,5A
Rated Output Voltage: 2 x 48VDC
Rated Output Current: 2 x 1,0 A
Rated Output Power: 96 W
Protection Type: IP 31
Protection Class: II
Operating Temperature: 0 - 45°C
Humidity: Storage 5% - 95%
Operation 10% - 80%
Air Pressure: Storage 500 - 1060 hPa
Operation 700 - 1060 hPa
Operating altitude: max. 2000m
Storage Temperature: -40°C - +65°C
Polarity of the two charge plugs:
+
+
+
"TECHNICAL DATA" LABEL
The label shown on the next page can be
found on the underside of the charger and
contains its technical data. Means:
Compliant with European
directives
Compliant with US and Canadian
directives
Protective insulation / device class 2
Do not use outdoors
Protect the device from moisture
Warning: Magnetic fields and forces
Before using the charger:
Read the operating instructions and
observe the accompanying leaflet
Do not dispose of in household waste
45 ° C
Temperature range for operation
0 °C
The label illustrated above is on the underside of the battery charger. Information on the technical details
and the symbols used can be found on the previous pages.
Please act in an environmentally-conscious manner and bring this product to your
regional recycling centre at the end of its service life. Please familiarise
yourself with the applicable legislation in your country regarding disposal,
because the WEEE Directive does not apply in all European States.
These components are also alternatively taken back by Alber or Alber dealers for
proper, environmentally sound disposal.
EN