Carrier Comfort Serie Manuel D'installation page 15

Factory Configuration Mode (Table 2)
PARAMETER
FEATURE
NUMBER
UNIT
301
CAPACITY
UNIT
302
CONFIGURATION
FORCED MODE 303
RATING NUMBER 304
CB TEST 305
CB TEST INFO 306
DESCRIPTION
This value is identifying the Size and it is
matched with the Inverter capacity during
the Mismatch process.
In addition, this code will be used in the
Envelope protection function to determine
the maximum admit able Frequency.
In case of GMC board replace in the field, The
service should update this code
4 -- > 1.25 HP
5 -- > 1.5 HP
6 -- > 1.75 HP (6 kW)
7 -- > 2 HP
8 -- > 2.5 HP (8 kW)
9 -- > 3 HP (9 kW)
10 -- > 3.5 HP
11 -- > 4 HP
12 -- > 5 HP (12kW)
13 -- >
14 -- >
15 -- >
16 -- >
17 -->
18 -->
0. Cooling Only
1. Heat & Cooling
2. Heating Only
This parameter allows to force the system in
a specific operating mode:
1. No
2. Standby
4. Booster heat (not Available for A2W Monobloc)
5. Booster cool (not Available for A2W Monobloc)
6. Rating Heating
7. Rating Cooling
0=No Rating Mode
≠0= Not to be used
1. Not Active
2. Active
Do not modify (Used for factory)
VALUE
DEFAULT
RANGE
VALUE
Min Max
4 18 6
0 2 1
0 7 0
0 199 0
1 2 1
- - -
INSTALLER
VALUE
15