Table des Matières
Publicité
IFACE Record Menu's
Menu 36 – Record Tracks
0= Off
1= Analog
The record command sent to the machine depends on the number of digital channels as
follows:
No Track arm commands sent to machine, track arm on the machine or
0= Off
machine remote.
Analogue 1-4, Video, and Assemble only.
1=Alg
Analogue 1-4, Video, Assemble and up to 8 Digital Record channels.
2=8
Analogue 1-4, Video, Assemble and up to 16 Digital Record channels.
3=16
Menu 37 – Analog & Video Record Ready
0= Disable
To enable crash record or insert edit on the Timecode or Cue tracks (A3 & A4) select 3=Asmb.
Menu 38 – Record Tally
0= Record or Edit
Some non-edit machines give a permanent Edit tally (for example the VO9600), if this is the
case select the appropriate tally source to disable.
Menu 39 – Record Command
0= Edit On/Off
Some Non-Edit machines will only accept a record command and not an Edit command.
Menu 40 – Rehearse Advance
0 frm
1 frm
2 frms
This parameter sets the individual machine record advance for use in Auto or instant
record. Adjust this parameter to set the actual record in point using auto record.
Menu 41 – Record Advance
0 frm
1 frm
2 frms
This parameter sets the individual machine record advance for use in Auto or instant record.
Adjust this parameter to set the actual record in point using auto record.
2017 CB Electronics
Clavier de contrôle TFT
Menu 36 - Record Tracks
2= 8
3= 16
Menu 37 – Analog & Video Record Ready
1= A1-A2
Menu 38 – Record Tally
1= Record
Menu 39 – Record Command
1= Record/Play
Menu 40 – Rehearse Advance
3 frms
4 frms
Menu 41 – Record Advance
3 frms
4 frms
4= 24
5= 48
6= 64
2= A1-A2+V
5 frms
6 frms
7 frms
5 frms
6 frms
7 frms
7= 80
8= 96
3= Asmb
2= Edit
2= Arm Only
8 frms
9 frms
8 frms
9 frms
Page : 24
Publicité
Table des Matières
