START-UP
The start-up occurs on the indicator of the leak alarms of the LWG series, type LWG 2000
and LWG 2005.
Please note the assembly and operating manual for the "Leak alarm type LWG
2000", part no. 15 073 50!
Please note the assembly and operating manual for the "Leak alarm type LWG
2005", part no. 15 074 51!
MAINTENANCE
Check the functions of the leak detection system regularly, but at least once per year. Check
according to FUNCTION CHECK.
It is the operator's responsibility to determine the type and frequency of the checks.
RESTORATION
If the actions described in TROUBLESHOOTING do not lead to a proper restart and if there is
no dimensioning problem, the product must be sent to the manufacturer to be checked. Our
warranty does not apply in cases of unauthorised interference.
TECHNICAL DATA
Probe
Voltage LWG 2000
Voltage LWG 2005
Material
Probe standard method
Probe tank installation
Length of probe cable
Storage medium temperature
If you have a constant error message or an alarm without the probe being wet, check the
connection line between the signal part and the probe for an interruption or short circuit and
reinstall if necessary.
DISPOSAL
To protect the environment, our products may not be disposed of along with
household waste.
The product must be disposed of via a local collection station or a recycling station.
part no. 15 073 96
12 V DC
19 V DC
Stainless steel 1.4301
Probe length 2m, 5m, 20m
Probe length maximum 1.4 m
3.6 m
-20 °C to +60 °C
Probe
9 / 10